HOW TO
Articles

CAR SPECIFIC
Articles

CarBasics
BLOG

Audi A4 - How to program remote windows

This article was provided courtesy of www.a4mods.com
Please visit them for more Audi A4 articles

Many people know that the OBD tool can be used with the Vag-Com software (registered version) to enable the windows on the A4 to operate via the remote key FOB. With a couple of coding changes you can get the windows to open via remote, and close the windows and sunroof via remote.

This tutorial will show you how to use the OBD tool to accomplish this.

SUPPLIES - The only thing I needed for this was the Vag-Com software and an OBD interface. I happened to use the OBD tool www.obdtool.com dongle since It is considerably cheaper. And works just as well. Although it is not needed for this particular mod, I suggest getting the dual K line OBDtool since it is only $10 more than the standard one. You will use it in other mods.
 

	Material Quantity Price OBDtool Version 2 - "Dual K-Line" 1 $81 Full Version of Vag-Com 311.2 1 depends

Step 1 -The first thing you need to do is switch your OBD tool to read the first K-line. This is done by switching the switch on the side Towards from the OBDII connector (towards the serial connector).

Step 2 -Connect the OBD tool to the OBDII port of the car (located under the driver's knee bolster). Boot up the Vag-Com Software click "Select" under Select Control Module.

To view the rest of this article, please click on the link below ;

http://www.a4mods.com/index.php?page=webcontent/pages/remotewindows.html

This article was provided courtesy of
www.a4mods.com
Please visit them for more A4 articles
 

Car Manuals from 99p delivered.