7 useful car tools every driver should own


7 useful car tools that will make car owning much easier and cheaper.

Even if you never do any DIY on your car, here are 7 useful car tools that every driver should own or have access to.

Don’t worry, we are not talking about getting your hands dirty and stripping engines. We’re not talking mechanics tools, just useful car tools that every driver will benefit from owning. Maybe you already have some, or someone in your family will own some,  so find out today !!

jump leads image1). Jump leads (booster cables).
Hopefully you will never suffer from your car not starting due to a flat battery. However, if you do you’ll be glad to have a set of jump leads to get you going again. With a set of jump leads and a relatives or neighbours car, just follow these instructions here and you should be able to get your car started again.

Keep a set in your boot and you never know, you might even be able to get someone else out of a fix. Click on the image for more details.

battery booster image2). Battery booster.
Another one for using when your car has a flat battery.  An alternative to jump leads, these car tools can start your engine without the use of another vehicle.

Keep your battery booster fully charged using a plug in your house. They are also useful items to have as they sometimes have a torch on them as well as a tyre inflator.  Here is a guide on How to use a Battery Booster. Click on the image for more details.

car battery charger3). Battery charger.
Another one for flat battery lovers (haters). Allow yourself time to get your battery fully charged – here is our guide on how to charge your car battery.  Make sure you do look into why your battery has gone flat, might be a faulty battery or alternator. Click on the image for more details. These car tools make you a very useful friend tp have, maybe the only time you will ever need to use one will be to charge someone else’s battery.

Tow rope4). Tow rope.
This is an essential and low cost item that should be kept in the boot of every vehicle.  Whether its used to tow your car home, or just to move it to a safer place after a breakdown, remember you get what you may for so don’t be too cheap or you’ll be in trouble when you do come to use it. Click on the image for more details. One of these car tools also makes you a very useful friend, maybe the only time you will ever need to use one will be to rescue someone else.

Telescopic wheel wrench5). Wheel wrench.
Lets face it, the spider brace or small tyre wrenches that come with cars as standard are completely rubbish.  Most of the time they will not loosen tight wheel nuts, leaving you stranded with a flat tyre.  Get yourself a telescopic wheel brace to replace the stock item in your boot, you’ll be glad you did. Low cost and a real life saver, check your wheel nut size before buying. Click on the image for more details. This is a very labour saving car tools that you will hopefully never have to use, but just imagine if you did get a flat tyre and you could remove the wheel because you didn’t have one of these.

Tyre pressure gauge6). Tyre pressure gauge.
You should all know the safety importance of having the right pressure, but what about the financial cost too !! Running with under or over inflated tyres causes premature wear, so a few quid spent on a tyre pressure gauge could save you a small fortune in tyre costs.  It could also help to spot a tyre that needs attention due to say a slow puncture or faulty valve. These car tools only costs a few pounds, and yes we all say that we will check our tyres the next time we go and fill up, then what happens. You forget or you get there and someone else is using it and you don’t have time to wait.

Tyre depth gauge7). Tyre tread depth gauge.
It is very important to ensure your tyres are well in excess of the legal tyre depth. What can also save you a lot money is finding out the optimum time to rotate your tyres (front to back). A few quid spent on a tyre depth gauge can ensure that you squeeze as many miles as possible from your tyres.

How to test your alternator

car alternatorTest car alternator Car alternator, if you don’t know what one is then take a look at our article what is an alternator. Your car alternator will not last forever, and when it does go, it can leave you stranded somewhere with a flat battery – and no-one needs that.

If this was article useful, subscribe to our also useful Newsletter, you can read more about it here – CarBasics Newsletter

Not everyone has breakdown cover. Perhaps you currently have car problems (battery keeps going flat) and you think it may be that the alternator is to blame !! Whatever your current situation, testing your alternator is a quick and simple job and something you should do to keep your car tip-top and reliable. You don’t need to take your car alternator apart to test it and you don’t need any expensive tools. What you will need (buy one, they are cheap or borrow one) is a volt meter or multimeter. They are very simple to use, here is a photo of one (cost about £10) ; Here is what you do, simple car alternator test ; Make sure all the accessories on your car are turned off (lights, radio etc.) and then rev up the cars engine to a fast idle (say 2000-2500 rpm). Set the volt meter or multimeter to the DC scale and measure the voltage across the battery terminals – red lead of the voltmeter on the positive terminal, black on the negative. You will need someone to rev the engine whilst you connect the meter to the battery. With the engine at a fast idle, the voltage on the meter should read around 14 volts (13.5 to 14.4). The alternator needs to generate a larger voltage than the battery’s rated voltage to overcome the internal resistance of the battery.

The current needed to recharge the battery would not flow at all if the car alternator output voltage was the same. The larger the difference between the alternator output and the battery voltage, then the quicker the battery will charge.

So as you can imagine, if your car is quite old and the alternator and the battery are too, problems can occur with the battery getting enough charge and making the car more difficult to start and less reliable.

If the reading on the multimeter is less than 12 volts then you may have a failed alternator.

Even if you have to buy a Haynes Manualmultimeter and some spanners, it will still probably cost you less than having a garage do the work.

The alternator is bolted to the side of the engine and is driven (turned) by the engine via a belt.  The belt turns a shaft inside the alternator when the engine is running and the output (voltage) is sent to the battery via wires. 

Many places sell brand new replacement alternators as well as refurbished or reconditioned alternators.  A reconditioned alternator has had all the internal wear parts such as brushes replaced with new ones. They will have been tested and will come with a guarantee, so don’t worry about using one of these, they are good as new and cheaper. I have also fitted second hand (used) alternators to a number of my cars. These have been sourced from scrap yards or vehicle dismantlers. They normally come with a receipt and can be changed within a short period of time if they turn out not to be working. I have always asked the supplier to test the alternator before I have paid for it. When buying parts it is always very important to keep the receipts incase a problem occurs. Receipts are always worth keeping as they show a history of your car which prospective buyers like to see when they are thinking of buying your vehicle.

If your garage ever tells you that you need a new 
alternator, ask them ;

a) have they performed a load test on it ?
b) what were the voltage readings ?
c) was the alternator belt worn or slipping ?
d) was there excessive noise from the alternator

These simple questions will let your mechanic know that you know a bit more about your cars electrical system than just how to turn the lights on. This should mean that you get given the best service and are treated better by the garage and not feel like you have been ripped off when work is done to your car.

Consider some breakdown cover to annoying eventualities like this.  Have a read of our unbiased reviews of the car breakdown services currently available (opens in new window).

This clip shows the sound that your alternator should NOT be making if it is working fine.

One more check ;
Next, turn on the heater, the rear window de-mister, the radio, the headlights and anything else that draws power from the battery.

Now rev up the engine again and look at the multimeter .

It should still be reading around 14 volts. If it reads lower than 13 volts the chances are that the alternator is faulty and will need to be replaced before it catches you out.

What to do if the alternator has failed
Replacing an alternator is not a difficult job, however it varies from car to car as to how difficult the alternator is to access and remove the belt. If you purchase a Haynes Manual (cost about £13), then it will show you with instructions and photos how to undertake this change on your specific car in the easiest way and it will tell you what tools you need.

If this was article useful, subscribe to our also useful Newsletter, you can read more about it here – CarBasics Newsletter

Jump start a car • How To


If your car won’t start because the battery has gone flat, then you may be able get it going again by jump-starting it.

‘Jump Starting’ is the method of using battery power from another vehicle to start your cars engine by the use of ‘Jump Leads’.

If this was article useful, subscribe to our also useful Newsletter, you can read more about it here – CarBasics Newsletter

What you need ;
1) A set of car jump leads, also referred to as booster cables
2) A friends car that is working.

Using jump leads is pretty simple and safe if you follow these instructions ;

1. Position both of the cars close together so that the jump leads will reach both batteries.

2. Then connect the car battery booster cables in this order ;

a. Connect (+) positive red cable to the (+) positive terminal on the dead battery.
b. Connect the other end of the (+) positive red cable to (+) positive terminal on the working car.
c. Connect (-) negative black cable to (-) negative terminal on the working car.
d. Connect the other end of the (-) negative cable to the (-) negative terminal on the dead battery.

3. You are now ready to start the working cars engine.  Turn off all electrical equipment on the working car (heater, lights, radio, etc.) so that all the battery power is getting used to jump start the dead battery. Let the working car run for a minute or so before you try to start the dead one. Revving the engine in the working car will produce more power and help with jumping the dead battery.
4. Now try and start the dead battery engine by turning the ignition. If it sounds like it is going to start but will not quite go, then rev the working car for a little longer before trying the dead battery again.

5. When the dead battery has started and is running, remove the jump leads.

Do this in reverse order ;
a. Disconnect (-) negative black cable from the terminal on dead battery.
b. Disconnect (-) negative black cable from the (-) negative terminal on the working car.
c. Disconnect (+) positive red cable from the (+) positive terminal on the working car.
d. Disconnect (+) positive red cable from the (+) positive terminal on the dead battery.

1) You must let the car that had the flat (dead) battery run for quite a while.
If you turn the ignition off shortly after starting it then it may not start again because there will not be enough charge in the battery. It might be worth taking the car for a drive, or driving the car home and connecting the battery to a battery charger overnight.

2) Ensure that when you are connecting and removing the jump leads, they do not touch each other and do not come into contact with any moving parts on either engine. Most quality jump leads have the clamps coated with plastic so there is less chance of the metal parts touching parts of the car or engine. This is something to consider when buying your jump leads.

3) If the car will not start after following this procedure, then it may be time to get the battery replaced.  It is suggested that you try replacing the dead battery with a borrowed one before you spend money on a new one because the fault may be somewhere else, such as the alternator.  Alternatively, get an auto-electrician/mechanic to check the vehicle over for you.

4) Car battery booster cables are always a useful thing to have on your car, whether to help you out of trouble and get you on your way, or to give someone else a helping hand. They are relatively inexpensive, and buying a set to keep in the back of your car is well worthwhile when compared to the inconvenience of having a flat battery. They can be purchased from any local motor-factors, or bought online from most car accessory websites.

As well as jump leads, there are a couple of other useful items that perhaps you should stick onto your Christmas or birthday wish list ;

1. Car battery chargers.
Click image for more info.
Keep this at home and if you ever suffer a flat battery on your car you can bring it into the house and recharge it overnight. The battery charger plugs into your house electric supply and has a black and red clamp for fitting onto the (+) (red) and (-)(black) of your battery. Car battery chargers normally take 12-24 hours to recharge your car, they will recharge slowly and normally let you know when the battery is full.

2. Battery booster packs.
Click image for more info.
Keep one of these on charge in your garage, and whenever you suffer a flat battery this will get you started. Inside it is a large battery and it also has (+) and (-) clamps. Keep it plugged in when it is not in use and then it will always be fully charged. Just attach it to your dead battery and it should provide enough power to start your car. Just remember to keep the car running until your engine has recharged the cars battery.

If this was article useful, subscribe to our also useful Newsletter, you can read more about it here – CarBasics Newsletter